• Chipset : ITE IT8212F ATA 133 IDE RAID Controller
• Bus : Compliant with PCI Specification Rev. 2.2
• Supports PCI power Management v1.0 to reduce the power consumption
• Compatible with the ATA/ATAPI-6 specification and supports two IDE channels with 4 drives
• Supports ANSI ATA proposal PIO modes 0,1,2,3,4 with flow control, DMA Modes 0,1,2,3,4,5,6
• 512 bytes FIFO for auto transfer per IDE channel to get a high performance
• Supports the RAID 0/1/0+1 function (applies to RAID controller only)
• Supports the JBOD function
• Supports the Scatter/Gather function for the DMA/UDMA function
• Includes one embedded CPU and firmware on the system to handle the RAID function. It can reduce the driver’s loading of system CPU and improve the system’s ability
• Low CPU utilization based on local processor architecture
• Supports the drivers for Windows 98SE/ME, Windows NT 4.0, Windows 2000/XP
  Note: After boot up, ITE ATA/133 RAID Controller will show the following screen. You can press <Ctrl-F> or <Ctrl-l> to enter Setup Utility

  Connectors :

• 2 X Ultra ATA 133 IDE connectors

   Package Content :

• PCI ATA 133 Controller / Raid Controller
• 1 x ATA 133 Cable
• 1 x Extra ATA 133 Cable ( Raid Option )
• User Manual
• Driver CD